PRTG Manual: SNMP NetApp Disk Free Sensor

<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP NetApp Disk Free Sensor

The SNMP NetApp Disk Free sensor monitors the free space on disks of a NetApp storage system via the Simple Network Management Protocol (SNMP).

SNMP NetApp Disk Free Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP NetApp Schijf Vrije Ruimte
French: NetApp espace disponible du disque (SNMP)
German: SNMP NetApp-Datenträgerspeicher
Japanese: SNMP NetApp 空きディスク
Portuguese: Disco livre NetApp (SNMP)
Russian: Свободное пространство диска NetApp по SNMP
Simplified Chinese: SNMP NetApp 磁盘可用空间
Spanish: Espacio libre en disco NetApp (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.
Limits	This sensor has predefined limits for several metrics.
Knowledge Base	Knowledge Base: How can I monitor capacity and used disk space on a NetApp?

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

netapp
snmpdiskfreesensor
snmpnetapp
snmpnetappdiskfreesensor

For more information about basic sensor settings, see section Sensor Settings.

NetApp Disk Free Settings

Setting	Description
File System	The name of the disk that this sensor monitors.
Virtual Disk	The name of the virtual disk that this sensor monitors (if applicable).

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Deduplication Saved Space	The deduplication saved space
Deduplication Saved Space %	The deduplication saved space (%)
Deduplication Shared Space	The deduplication shared space
Deduplication Shared Space %	The deduplication shared space (%)
Disk Status	The disk status Up status: Creating, Mounted, Mounting, Nofsinfo, Replayed, Replaying, Unmounting Down status: Destroying, Frozen, Unmounted
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Files Free	The free files (%)
Free Bytes	The free space
Free Space	The free space (%) This channel is the primary channel by default. This channel has default limits: Lower error limit: 10% Lower warning limit: 25%
INodes Free	The free index nodes (%)

KNOWLEDGE BASE

How can I monitor capacity and used disk space on a NetApp?

https://kb.paessler.com/en/topic/61231

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863